Upgrading from Versions 2.60–6.50 to Version 8.00
With Continia Document Capture 8.00 and Continia Expense Management 8.00, Continia Software released a combined upgrade guide that partners can use to upgrade directly from Document Capture 4.50–6.50 and/or Expense Management 2.60–6.50 to Document Capture 8.00 and/or Expense Management 8.00.
Note
When you upgrade from Document Capture 7.00 and/or Expense Management 7.00 to version 8.00, use the regular upgrade procedure described in Manual Upgrade from Version 7.00 to Version 8.00 or Automated Data Upgrade from Version 7.00 to Version 8.00.
Use this upgrade guide to manually upgrade Document Capture (DC) and Expense Management (EM) in the version of Microsoft Dynamics NAV/Business Central (BC) currently used with Document Capture and Expense Management, (NAV 3.70 to BC v14).
If you're using Document Capture or Expense Management in Microsoft Dynamics 365 Business Central online, the main upgrade is performed automatically when you install Document Capture 8.00/Expense Management 8.00, (after uninstalling Document Capture 7.00/Expense Management 7.00).
To migrate from a FOB-based version of NAV/Business Central to an on-premises extension and/or online, see Upgrading NAV/Business Central with Expense Management Installed and Migrating Expense Management from Business Central On-Premises to Cloud.
Prerequisites
To use this upgrade guide, you must be running one of the following versions of Document Capture and Expense Management:
Document Capture
- Document Capture 4.50 with any service pack
- Document Capture 5.00 with any service pack
- Document Capture 5.50 with any service pack
- Document Capture 6.00 with any service pack
- Document Capture 6.50 with any service pack
Expense Management
- Expense Management 2.60 with any service pack
- Expense Management 3.00 with any service pack
- Expense Management 3.50 with any service pack
- Expense Management 4.00 with any service pack
- Expense Management 6.50 with any service pack
If your system is running an older version, you must first upgrade to the required versions.
In this version, we have upgraded the Document Capture client components and server components, which you must update before you start working with Document Capture and Expense Management. This guide will help you to do this correctly. The Document Capture and Expense Management objects in this version aren't backward-compatible with older components, just as the components included in this version aren't backward-compatible with older objects.
Important
If you haven't already installed Document Capture and Expense Management on your system, do not use this document.
Task 1: Check minimum version requirements
Ensure your current system is running one of the supported versions of Document Capture or Expense Management listed in Prerequisites. If not, you must follow the relevant upgrade guide from an earlier version to Document Capture 4.50 and/or Expense Management 2.60. Refer to the appropriate previous upgrade guide:
- For Document Capture: https://continia.zendesk.com/hc/en-us/sections/201853305-Upgrade-Guides (only available to partners)
- For Expense Management: https://continia.zendesk.com/hc/da/sections/360000175700-Upgrade-Guides (only available to partners)
Task 2: Import updated NAV license file
You must use a partner developer license to perform the upgrade process. After the upgrade, you must use a new or updated customer license file from Microsoft and import it into NAV. If you're using the Microsoft Dynamics NAV Server, you must restart it to use the new license.
Task 3: Merge objects
If you've modified your customer's system, check if any of the modified objects conflict with Document Capture or Expense Management objects, then merge if necessary. You should merge objects in a test system, so they're ready to be imported later in the upgrade process.
Task 4: Import pre-upgrade package
The pre-upgrade package depends on both your NAV/Business Central version and the version of Document Capture/Expense Management that you're upgrading from.
Important
You must use the correct upgrade package.
Here is an example of a pre-upgrade filename and how to interpret it:
- “NAV 2016 to BC14 - DC4.50 to DC8.00, EM2.60 to EM8.00 – Direct Upgrade Pre”.fob
- The NAV version is between NAV 2016 and BC v14 (Business Central April 2019 )
- The Document Capture and Expense Management version before the upgrade is DC v4.50 and EM v2.60
- This is the pre-upgrade .fob
Task 5: Run pre-upgrade step
After importing the correct pre-upgrade package (replace all), go to either Document Capture Setup or Expense Management Setup, then select Upgrade Upgrade Data to Latest Version. This performs the pre-upgrade.
Important
You must start the upgrade in a company with either Document Capture or Expense Management activated.
If you upgrade from DC v6.00.x or DC v6.50.x, or from EM v4.00.x or EM v6.50.x, the following isn't relevant:
- Before starting the upgrade, ensure the product activation status is correct in all companies that are being upgraded. If the upgrade code detects a company without a valid activation state, it will stop the upgrade with the following error message:
"One or more companies have a wrong activation state. Run page 6086102 "CDC Company Registration Upg." to update the companies activation state, and then rerun the pre-migration to continue the upgrade process."
- Running this page/form (depending on the NAV version) allows you to activate or deactivate Document Capture and Expense Management separately for each company. The upgrade can't continue unless all product/company combinations are either activated or deactivated.
Task 6: Install all tools and components
You must perform all installations described below using the Setup executable, located in the root of the product folder (Setup.exe).
Note
The installer updates the add-ins folder (Client and/or Server) in the standard installation path. Therefore, if your installation path differs from the standard Microsoft path, you must copy the new add-in folder to the folder that your installation resides in.
Task 7: Upgrade server components
To upgrade your server components, use the appropriate guide, (depending on your version of NAV/Business Central).
Version | Guide |
---|---|
NAV Server 2009 – 2009 R2 | Only perform the following steps if you're using Dynamics NAV 2009 – 2009 R2:
|
NAV Server 2013 – BC14 | Only perform the following steps if you're using Dynamics NAV 2013 – Business Central April 2019 (BC14):
|
NAV Classic Upgrade PC | Only perform the following steps if you're using Dynamics NAV Classic:
|
NAV RTC Upgrade PC | Only perform the following steps if you're using Dynamics NAV RTC:
|
Task 8: Update NAV objects and data
Important
Before carrying out object modifications or starting the data upgrade, back up the database.
Import the new DC v8.00/EM v8.00 objects from the product folder. Use “Replace All” in Import Worksheet. Some objects may show a warning during import, as some parts of the new Version List have a changed format. For NAV 2015 and later, set Synchronize Schema to “Later” during object import.
Warning
For all versions from NAV 2013 to Business Central October 2018 (BC v13), refer to the following pages. However, if you're importing the DC v8.00/EM v8.00 object package, skip the four pages mentioned below as the pages were unintentionally included in the release packages but will be removed in service pack 1.
- Page 5 Currencies
- Page 10 Countries/Regions
- Page 209 Units of Measure
- Page 472 VAT Posting Setup
Task 9: Post-upgrade
To complete the post-upgrade task:
- Import the object post-upgrade package corresponding to your NAV/BC version and the Document Capture/Expense Management version that you're upgrading from (such as “NAV 2016 to BC14 – DC4.50 to DC8.00, EM2.60 to EM8.00 – Direct Upgrade Post.fob”).
- Use “Replace All” in Import Worksheet. When using NAV 2015 or a newer version, set Synchronize Schema to “Later” during import.
- Compile all Document Capture and Expense Management objects (Version List filter *DC*|*EM*|*CC*|*DN*). When using NAV 2015 or a newer version, set Synchronize Schema to “Later”. Some Document Capture/Expense Management objects will not compile. They'll be deleted later in the upgrade process.
- Compile all MenuSuites (not only Document Capture and Expense Management).
- When using NAV 2015 or a newer version, run Tools > Sync. Schema For All Tables > With Validation.
- Restart the RTC Client.
- Make sure that you start the upgrade in a company with either Document Capture or Expense Management activated.
- Run the function Upgrade Data to Latest Version from the Document Capture Setup card or the Expense Management Setup Card in any activated company. This will:
- Handle all companies and upgrade Document Capture data, if needed.
- Upgrade Expense Management data, if needed.
- The post-update process should complete without any errors.
- Restart the RTC Client.
- Verify that the activation status of the upgraded companies is as expected.
Task 10: Upgrade client components
To upgrade your client components, follow one of the guides below, depending on your version of NAV/Business Central:
Version | Guide |
---|---|
NAV Classic Clients | Only perform the following steps if you're using Dynamics NAV Classic:
|
NAV RTC Clients 2009 – 2016 | Only perform the following steps if you're using Dynamics NAV 2009 – 2016:
|
NAV RTC Clients 2017 – BC14 |
|
Task 11: Delete unused application and upgrade objects
After completing the upgrade, remove the upgrade objects (All object types, with Force):
Filter: 6086100..6086199
Note
For versions before NAV 2015, you must manually empty all upgrade tables and obsolete tables before deletion.
Some objects that were part of the Document Capture/Expense Management version that you upgraded from are not needed anymore. Therefore, whenever you upgrade from one of the versions below, delete the objects specified:
- Tables:
6085620|6085701
The objects below are deleted in code, so it's unnecessary to delete them manually:
- Forms:
6085606|6085716|6085751|6086348|6086403|6086418|6192771|6192773|6192776 - Pages:
6085606|6086037|6086054|6086348|6192771|6192777|6192778|6192773|6192776 - Codeunits:
6085620|6085622|6085747|6085800|6086335|6085929|6192774|6192776|6192778
Specifically for 2009 R2 RTC
Support for the NAV 2009 R2 RoleTailored Client has been discontinued as of DC v8.00 and EM v8.00. Only the Classic Client is supported.
Delete all Document Capture and Expense Management pages, except web service pages. Pages used as web services by the Continia Web Approval Portal all end with “(WS)” in the object name.
Document Capture contains modifications to the four standard pages mentioned below. Manually remove these modifications after the upgrade.
- Page 26 Vendor Card
- Page 138 Posted Purchase Invoice
- Page 140 Posted Purchase Credit Memo
- Page 344 Navigate
Task 12: Update the Continia Web Approval Portal
To update the Continia Web Approval Portal:
- If you use NAV objects below NAV 2009 R2, import the updated Web Approval Portal objects from the product folder. For NAV 2009 R2 and later versions, these objects are included in the base package.
- Compile all Document Capture and Expense Management objects (Version List filter *DC*|*EM*|*CC*|*DN*).
- Run the function Create Web Services from the Continia Web Portal list. It's only required to run this function in one company.
- If you continue to use Continia Web Portal on-premises, create a new website in IIS or update the existing one.
- From the Continia Users screen in NAV, run the function Export Users to export web users.
Task 13: Update vendor templates configured with “Prices incl. VAT”
The following is only necessary if you upgrade from versions DC v4.50, DC v5.00, or DC v5.50 and the system contains vendor templates with “Prices incl. VAT”.
With the release of Document Capture v6.00, the registration of purchase documents with “Prices incl. VAT” was changed. For you to fully benefit from the new functionality, some modifications to existing vendor templates are needed. For more information about the updated functionality and necessary changes, see How to upgrade templates with prices, including VAT, when upgrading to DC6-00 (this article is only available to partners).
The article mentions the “Template Upgrade Tool”. You can find this in the DC v8.00 product .fob by importing the following objects:
Table: 6086110 and 6086111
Page: 6086100 and 6086101